Water Well Inspections: Don’t Break Ground or Your Budget?
Water well inspection is important to evaluate the condition of your well. A well might look perfectly fine and offer you clean water in the beginning, but it can develop problems like a high amount of contaminants and less flow of water. Therefore, it’s important to opt for a yearly well inspection, even if you are satisfied with the water.
Inspection can help you prevent problems before they grow worse. Also, it will help you ensure that the well is working in accordance with local laws. Don’t worry! You don’t need to break ground or the budget for the inspection. All you need to do is hire an expert who can investigate your well without costing you a lot and damaging your ground.
What to Expect from Well Inspections?
Well, an inspection may include several steps that your hired professional lays out based on how they deal with the well. Here are some things that your expert might do.
Flow Test
One of the most important parts of good inspection is the flow test. They conduct this test to understand the system output. In addition to the test, the expert will check the water level before and while pumping to determine whether it’s working or not. They will also inspect the performance of the pump motor to ensure its line voltage, grounding, and amp load.
Since the primary purpose of the flow test is to check the flow of water, your hired expert will also check the pressure tank and pressure switch contact. Investigating both of these things helps understand the reason for low water pressure. And yes, there is no need to break the ground to do this test. On top of that, it will not cost you a lot.
Inspection of Well Equipment
Equipment like irrigators, turbine pumps, and electrical submersible pumps require yearly checkups and maintenance. No matter if they are properly working or not, you need to hire an expert to get them thoroughly inspected. Even a little carelessness can damage your expensive equipment. So, if you want to continue to enjoy the benefits of these things, you need to inspect them. Inspecting the equipment is as easy as checking things from the outside and turning them on.
Test for Contaminates
This test of the water determines the level of nitrates and bacteria in your water. The experts might also look for signs of manganese, iron, sulfides, water hardness, and other problems.
They will also make sure that your water is safe to use for appliances and house items. Based on your location, a team of professionals may take multiple tests to understand problems with staining, odor, taste, water appearance, etc. Note that these tests are done after considering your local laws and regulations to ensure that the water from the well is safe to use. Also, for these tests, experts use a testing kit and take some samples of your water. They will either send it to the lab or check it on the spot if they have the necessary equipment.
Once your well gets a thorough checkup, you will receive a written report outlining all the tests and their results. The report helps you understand whether you need to make any repairs or replacements. If you do, you can take help from leading contractors in the market like Bruce Mackay Pump and Well Service.
Bottom Line
So, yes, water well inspections don’t need to break the ground. You don’t have to worry about breaking the bank, either. If you hire experienced and skilled experts, they will conduct an inspection without causing any problems for you. The test and inspection process may take a while but are not intrusive.
Since the test is easy to conduct, you must opt for it at regular intervals. This will help you prevent damage to the well or well equipment. Also, make sure to avoid conducting an inspection on your own and hire credible and reliable professionals instead.