Water Quality Issues After Drilling – What’s Behind It?

Drilling a water well for a new source of fresh water for your private property can be an exciting project! But when the very first glass of water that you have after the installation doesn’t taste like you imagined it, things can fall apart quickly. You might notice that the water is

• Cloudy or muddy 
• Metallic and earthy in taste
• Having a strange smell to it.

Water quality issues after drilling a new well are quite common, but so are the ways to fix them once and for all! But before you look for the solutions, it’s important that you know what’s really going on with your well water, why it happened in the first place, and how you can prevent it in the future. 

And this blog’s gonna answer all your questions one by one!

Common Problems That You Might Notice

If you’ve recently done water well drilling, then you need to stay aware of some common problems that you might face after the service.

• Cloudy or Muddy Water: You might see that the well water is slightly cloudy and feels muddy.
• Bad Taste: When you drink the well water and it leaves a metallic taste in your mouth, then you know something is wrong with the water.
• Strange Smell: One of the worst things to have after drilling a well is having a smell of rotten eggs in the water! 
• Unusual Color: If you see that your property’s water is yellow, orange, or brown in color, then there might be something going on inside the well!
• Lower Water Pressure: When the flow from your faucets is low and weak, then it means something’s clearly off!

When you notice that these changes aren’t going away on their own, the safe thing to do is to rely on a professional water pump service to provide you with the right solution. They’ll know what to do, how to do it, and give you proper advice to ensure these problems don’t bother you again!

Why Does Water Quality Change After Drilling?

Now you know the problems that you might face after drilling a new well. But you might think, “Why does it happen in the first place?” Well, when you drill a new well, it actually shakes things up underground. And that’s why you see some changes in your water’s color, taste, or smell. 

Usually, the reasons behind such problems are –

• Sediments Stirring Up

While drilling, some loose fine particles can come up, like sand, silt, and clay. And these particles can float in your water for days or sometimes for weeks until you flush the entire system.

• Natural Minerals

When elements like iron, manganese, or sulfur enter your well water, you might find a metallic or earthy taste in the water. Sometimes, you can even have that “rotten egg” smell in the water because of this mineral buildup.

• Microbes in the Water

While drilling, some microbes, like bacteria, can get inside the well water and change its quality. These microbes are mostly harmless and won’t affect your health. 

But if the problem persists for a long time and causes health issues, then you’ll have to opt for proper treatment of the well water by taking professional help.

• New Water Flow

Your well might be reaching a new underground water source, and that water can have its own natural taste, smell, or color. It’s normal for the water to feel a little different at first until things balance out.

How Long Do These Issues Last?

The time for which these changes can last usually depends on the severity of the problem. You’ll not have to worry a lot if you have cloudy or muddy water after drilling a new well. These problems will usually clear on their own if you flush out the system to clear the sediments. 

Plus, if your water tastes metallic after drilling a new well, sometimes you won’t have to do anything at all! You can just keep using the water regularly and wait for it to go away on its own. If you don’t like the taste, you can buy water from a store for a few days for your regular use!

But if these problems continue for more than a few weeks or worsen over time, it’s important to take professional help to ensure your water is safe and clean.

When it is time to call the pros

When issues like lower water pressure, rotten egg smell, and discoloration of your water get worse with time, then you’ll need professional help for the treatment of your new well water. They can –

• Test the Water: To check for minerals, dirt buildup, and microbes in the water.
• Recommend the Right Treatment: They can suggest solutions like using water softeners, chlorination, pump inspections, filtration, disinfection, or other adjustments to the system.
• Restore Safe Water: This will help you have peace of mind knowing that the water is safe and clean for your daily use.

Need a Trusted Well Service Company? Call Bruce Mackay & Pump Service Today

How You Can Prevent Water Quality Problems from the Start

If you take proper measures to prevent water quality problems, then you can avoid facing serious water quality issues after drilling a new well. 

This way, you can save your money and time while enjoying good quality water in your property for decades! And this is how you can make sure of this!

• Choose an experienced company that provides water well drilling in Fallon, and understands your local geology.
• Ask about proper casing and sealing to keep surface contaminants out.
• Take the seasonal factors into account when it comes to drilling a new well. Spring or early fall is usually the best time, as the ground is easier to work with and water levels are more stable.
• Make sure your pump system is installed properly and serviced on time to maintain strong pressure and clean water flow.
• You can opt for regular water testing to know if there are excess minerals, microbes, or other contaminants in the water.

Questions You Might Have

• Can minerals in my well water damage plumbing or appliances?

Yes, high levels of iron, manganese, or hardness can cause buildup in pipes and damage your plumbing system. That’s why it’s important to treat the water properly in such cases for long-term protection.

• How soon after drilling should I test my water?

You can test the water within the first week or two, before regular use.

• Why is my water cloudy even after flushing the system?

Some fine sediments can take weeks to settle. If this issue keeps getting worse, you can contact a professional water pump service to solve the problem!

We’ll Take Care of All Your Well Water Issues! Give Us a Call Now!

Takeaway

Facing water quality issues right after drilling a new water well is quite common. You may face problems like cloudy water, strange tastes, or smells that happen due to the buildup of sand and dirt in the well water. These issues will usually go away on their own. 

But if you face persistent problems like discoloration, lower pressure, and strong smells with the water, it means minerals, microbes, and other contaminants have accumulated in the well. And for this, you’ll need to rely on a professional water drilling service for a quick, reliable, and long-lasting solution!

Bruce Mackay Pump & Well Service – Solving Your Well Water Issues Since 1981!

With over 40 years of experience in providing water pump services to customers, Bruce Mackay Pump & Well Service is your trusted partner for all well-related services. 

You don’t need to search for the “best water well drilling near me” anymore, as our experts are always here to provide you with the best service in town – 24/7! We can test water and provide durable solutions that’ll solve all the water quality issues that you’re facing after drilling a new well. 

You’ll always get affordable prices and high-standard services when you choose our A+ rated BBB-accredited company ! Call us now at 775-346-6321.